무료 이미지 : 바퀴, 차량, 오토바이, 마쓰다, 미타타, 새크라멘토, mx5, 엔진 오일 교환, 7500 마일 관리, 자동차 제조, 자동차 외장 3000x2400
Public Domain
감사합니다 PxHere
기사에 포함 (예 : Wordpress, Blogspot)
In nearly every regard, the Miata is a marvel of thoughtful design and engineering. The placement of the oil filter is one significant exception, which is a total b***ch to replace. In fact, it’s hard to even see it, much less get a wrench on it. With the car on a jack stand and the right, front wheel removed, you can reach up into the fenderwell to the oil filter. If you’re lucky, and the filter was not overtightened when installed, you’re going to be able to twist it off by hand. It’s going to leak dirty oil when you remove it, so have plenty of shop rags on hand. When installing the new filter, apply light coat of fresh oil to the gasket and tighten only three-quarters of a turn more after the gasket contacts the face of the housing (Madza says 1-1/16 turn). In any event, always hand tight; never use a wrench. -go to step 4-
무료 고해상도 사진 차, 바퀴, 차량, 오토바이, 엔진, 마쓰다, 미타타, 새크라멘토, mx5, 엔진 오일 교환, 7500 마일 관리, 자동차 제조, 자동차 외장
, 촬영 Canon PowerShot G9 01/15 2017 함께 찍은 사진 8.0mm, f/4.5s, 1/20s, ISO 80










