Gambar : kendaraan, desain interior, Area publik, lumixfz200, bridgecamera, trainsignals, tuas, signalbox 2400x1807
Public Domain
Ucapkan terima kasih kepada PxHere
Sematkan ke dalam artikel Anda (mis. Wordpress, Blogspot)
The first semaphore signals were controlled by levers situated at the signals. Some early signals protruded from the roof of the controlling signal box. Later, remote operation was effected by levers connected to the signal by single wires (UK), pairs of wires (Continental Europe), or pipes supported on rollers (US). The levers were grouped together in a building known as a "signal box" (UK & Australia) or "interlocking tower" (US). In the UK multiple signal wires were grouped together, and in station areas were commonly routed beneath platform faces just above rail level. The operation of a single signal wire would cause some of the adjacent wires to 'jangle', and this noise was one of the many characteristic sounds of railway travel until the gradual introduction of colour-light signals from the mid 20th century.
Bebas-foto resolusi tinggi dari kendaraan, desain interior, Area publik, lumixfz200, bridgecamera, trainsignals, tuas, signalbox
, diambil dengan DMC-FZ200 01/01 2017 gambar yang diambil dengan 6.0mm, f/4.0s, 10/1250s, ISO 160
Gambar dirilis bebas dari hak cipta di bawah Creative Commons cc0.
Anda dapat mendownload, memodifikasi, mendistribusikan, dan menggunakannya bebas royalti untuk apa pun yang Anda suka, bahkan dalam aplikasi komersial. Atribusi tidak diperlukan.











