hình ảnh : Xe, thiết kế nội thất, phạm vi công cộng, Lumixfz200, Bridgecamera, Trainsignals, Đòn bẩy, máy phát ra tín hiệu 2400x1807
Public Domain
Nói cảm ơn PxHere
Nhúng vào bài viết của bạn (ví dụ: Wordpress, Blogspot)
The first semaphore signals were controlled by levers situated at the signals. Some early signals protruded from the roof of the controlling signal box. Later, remote operation was effected by levers connected to the signal by single wires (UK), pairs of wires (Continental Europe), or pipes supported on rollers (US). The levers were grouped together in a building known as a "signal box" (UK & Australia) or "interlocking tower" (US). In the UK multiple signal wires were grouped together, and in station areas were commonly routed beneath platform faces just above rail level. The operation of a single signal wire would cause some of the adjacent wires to 'jangle', and this noise was one of the many characteristic sounds of railway travel until the gradual introduction of colour-light signals from the mid 20th century.
Các hình ảnh có độ phân giải cao miễn Xe, thiết kế nội thất, phạm vi công cộng, Lumixfz200, Bridgecamera, Trainsignals, Đòn bẩy, máy phát ra tín hiệu
, chụp với một DMC-FZ200 01/01 2017 Những hình ảnh chụp với 6.0mm, f/4.0s, 10/1250s, ISO 160
Những hình ảnh được phát hành miễn phí bản quyền tác giả theo Creative Commons CC0.
Bạn có thể tải về, sửa đổi, phân phối và sử dụng chúng hoàng miễn phí cho bất cứ điều gì bạn thích, thậm chí trong các ứng dụng thương mại. Ghi công là không cần thiết.











