Bakgrundsbilder : fordon, inredningsdesign, allmängods, lumixfz200, bridgecamera, trainsignals, spakar, signalbox 2400x1807

Säg tack till PxHere

Våra skapare älskar att höra från dig och se hur du har använt deras foton. Visa din uppskattning genom att donera, tweeta, facebook och följa!

Bädda in i din artikel (t.ex. Wordpress, Blogspot)

The first semaphore signals were controlled by levers situated at the signals. Some early signals protruded from the roof of the controlling signal box. Later, remote operation was effected by levers connected to the signal by single wires (UK), pairs of wires (Continental Europe), or pipes supported on rollers (US). The levers were grouped together in a building known as a "signal box" (UK & Australia) or "interlocking tower" (US). In the UK multiple signal wires were grouped together, and in station areas were commonly routed beneath platform faces just above rail level. The operation of a single signal wire would cause some of the adjacent wires to 'jangle', and this noise was one of the many characteristic sounds of railway travel until the gradual introduction of colour-light signals from the mid 20th century.

Den fria högupplöst bild av fordon, inredningsdesign, allmängods, lumixfz200, bridgecamera, trainsignals, spakar, signalbox

, tillsammans med en nära DMC-FZ200 01/01 2017 Bilden tagen med 6.0mm, f/4.0s, 10/1250s, ISO 160

Bilden släpps fri av upphovsrätten enligt Creative Commons CC0.

Du kan ladda ner, modifiera, distribuera och använda dem royaltyfri för vad du vill, även i kommersiella tillämpningar. Skrivning krävs inte.