무료 이미지 : 차량, 인테리어 디자인, publicdomain, lumixfz200, 브리지 카메라, 기차 신호, 레버, 신호 상자 2400x1807

차량, 인테리어 디자인, publicdomain, lumixfz200, 브리지 카메라, 기차 신호, 레버, 신호 상자 Public Domain

감사합니다 PxHere

저희 제작자들은 여러분의 의견을 듣고 사진을 어떻게 사용했는지보고 싶어합니다. 기부, 트윗, 페이스 북 및 팔로우를 통해 감사를 표하십시오!

기사에 포함 (예 : Wordpress, Blogspot)

The first semaphore signals were controlled by levers situated at the signals. Some early signals protruded from the roof of the controlling signal box. Later, remote operation was effected by levers connected to the signal by single wires (UK), pairs of wires (Continental Europe), or pipes supported on rollers (US). The levers were grouped together in a building known as a "signal box" (UK & Australia) or "interlocking tower" (US). In the UK multiple signal wires were grouped together, and in station areas were commonly routed beneath platform faces just above rail level. The operation of a single signal wire would cause some of the adjacent wires to 'jangle', and this noise was one of the many characteristic sounds of railway travel until the gradual introduction of colour-light signals from the mid 20th century.



무료 고해상도 사진 차량, 인테리어 디자인, publicdomain, lumixfz200, 브리지 카메라, 기차 신호, 레버, 신호 상자

, 촬영 DMC-FZ200 01/01 2017 함께 찍은 사진 6.0mm, f/4.0s, 10/1250s, ISO 160

이미지는 Creative Commons CC0에 따라 저작권이 없습니다..

상용 응용 프로그램에서도 원하는대로 로열티를 다운로드, 수정, 배포 및 사용할 수 있습니다. 저작자 표시는 필요하지 않습니다..

모든 댓글(0)