Obrazy : vozidlo, interiérový dizajn, verejná doména, lumixfz200, bridgecamera, trainsignals, páky, signalbox 2400x1807

Povedzte vďaka PxHere

Naši tvorcovia radi počúvajú a vidia, ako ste použili ich fotografie. Ukážte svoje ocenenie darovaním, tweeting, facebookom a sledovaním!

Vložte do svojho článku (napr. Wordpress, Blogspot)

The first semaphore signals were controlled by levers situated at the signals. Some early signals protruded from the roof of the controlling signal box. Later, remote operation was effected by levers connected to the signal by single wires (UK), pairs of wires (Continental Europe), or pipes supported on rollers (US). The levers were grouped together in a building known as a "signal box" (UK & Australia) or "interlocking tower" (US). In the UK multiple signal wires were grouped together, and in station areas were commonly routed beneath platform faces just above rail level. The operation of a single signal wire would cause some of the adjacent wires to 'jangle', and this noise was one of the many characteristic sounds of railway travel until the gradual introduction of colour-light signals from the mid 20th century.

Na fotografii zadarmo high-rozlíšenie vozidlo, interiérový dizajn, verejná doména, lumixfz200, bridgecamera, trainsignals, páky, signalbox

, odobratých v DMC-FZ200 01/01 2017 Snímka odfotografovaná s 6.0mm, f/4.0s, 10/1250s, ISO 160

Obraz je prepustený bez autorských práv Creative Commons CC0.

Môžete si stiahnuť, upravovať, šíriť a používať ich royalty free pre čokoľvek chcete, a to aj v komerčných aplikáciách. nie je vyžadované uvedenie zdroja.